Verification · Certificates issued
Certificate AN-2026-00001
Valid
Issued
This certificate was issued by ANALYTON and has not been withdrawn.
Verification confirms that a certificate with this number and key was issued by ANALYTON on the date shown, for the sample described, and states its current status.
| Report number | AN-2026-00001 |
| Issued | 2026-09-22 |
| Status | Valid |
| Sample | Retatrutide, lyophilised powder, vial labelled 10 mg |
| Batch number | ATRET-10-2511-01 |
| Matrix | Research peptide |
| Determinations performed | 18 |
| Issued by | ANALYTON |
| Certificate file | AN-2026-00001.pdf |
Labelled 10 mg / 9.94 mg peptide / 99.4% of label
The container was labelled 10 mg and held 10.42 mg of powder when weighed. Net peptide content of that powder is 95.4% w/w, so the peptide in the container is 9.94 mg.
| Determination | Method | Result | Specification |
|---|---|---|---|
| Appearance | Visual | White to off-white powder | White to off-white powder |
| Identity | LC-HRMS (ESI+), USP <621> principles | Deconvoluted monoisotopic mass 4728.47 Da, deviation 0.4 ppm; observed m/z 1577.16 (3+) and 1183.13 (4+) | Theoretical monoisotopic 4728.472 Da from C221H342N46O68, expected m/z 1577.165 (3+), 1183.125 (4+) |
| Purity | RP-HPLC, C18, 214 nm, area % | 99.23 ± 0.20 % (k = 2) | >= 98.0 % |
| Related substances | RP-HPLC, 214 nm; LOD 0.01 %, LOQ 0.03 %, reporting threshold 0.05 % | Largest single impurity 0.23 % at RRT 1.03 (± 0.03 %); total impurities 0.77 %, i.e. 0.077 mg per vial | Single <= 1.0 %, total <= 2.0 % |
| Impurity profile | RP-HPLC with LC-HRMS assignment | RRT 0.93, 0.11 %, -18 Da (Asp succinimide); RRT 0.97, 0.19 %, same mass (isoAsp at Asp9 or Asp15); RRT 1.03, 0.23 %, +0.98 Da (deamidation of Gln3 or Gln18); RRT 1.08, 0.14 %, +16 Da (Tyr oxidation); RRT 1.15, 0.10 %, -18 Da (Asp15 succinimide) | Peaks above 0.05 % reported (ICH Q3B) |
| Net peptide content | Assay | 95.4 ± 1.2 % w/w (k = 2) | — |
| Fill weight | Gravimetric | 10.42 ± 0.05 mg | Labelled 10 mg |
| Peptide per vial | Calculated from fill weight and net peptide content | 9.94 mg per vial labelled 10 mg, i.e. 99.4 % of label | 95 to 105 % of label |
| Counter-ion content | Ion chromatography (cation) | Sodium 1.10 % w/w (± 0.08 %), i.e. 0.11 mg per vial | <= 5.0 % |
| Trifluoroacetate | Ion chromatography, LOQ 20 ppm | Not detected | <= 1000 ppm |
| Water content | Coulometric Karl Fischer, USP <921> | 2.80 ± 0.15 % w/w (k = 2), i.e. 0.29 mg per vial | <= 8.0 % |
| Mass balance | Peptide + counter-ion + water | 95.40 + 1.10 + 2.80 = 99.30 % (± 1.2 %) | Close to 100 % |
| pH | Potentiometric, 10 mg/ml in water | 6.8 | 6.0 to 7.6 |
| Solubility | Visual, 10 mg/ml and 1 mg/ml | >= 10 mg/ml in water and in bacteriostatic water; clear, colourless, free of particles within 30 s. Lipidated peptide: dissolve at pH 7.5, opalescent below pH 6 | Clear solution |
| Bacterial endotoxins | Kinetic chromogenic LAL, USP <85> | < 0.001 EU/mg (< 0.01 EU per vial) | <= 10 EU/mg |
| Sterility | Membrane filtration, USP <71>; fluid thioglycollate 30 to 35 °C and soya bean casein digest 20 to 25 °C | No growth after 14 days, 2 vials | No growth |
| Residual solvents | Headspace GC, USP <467> | Acetonitrile 45 ppm; N,N-dimethylformamide, methanol, dichloromethane, diethyl ether, diisopropyl ether and piperidine each < 10 ppm (LOQ 10 ppm) | ICH Q3C: acetonitrile <= 410, DMF <= 880, methanol <= 3000, dichloromethane <= 600, ethers <= 5000 ppm |
| Elemental impurities | ICP-MS after microwave digestion (HNO3/H2O2), USP <233> | Cd, Pb, As, Hg < 0.05 µg/g; Co, V, Ni < 0.10 µg/g, all below LOQ | ICH Q3D(R2) Class 1 and 2A, parenteral PDE |
| Chiral purity (D-amino acids) | Acid hydrolysis (6 M DCl in D2O, 110 °C, 24 h), Marfey's derivatisation (FDAA), LC-MS | D-Asp 0.12 %, D-Ser 0.08 %, D-Glu 0.05 %, D-Tyr 0.04 %, others < 0.05 %; alpha-methyl-Leu < 0.05 %; Aib achiral; sum of D-forms 0.29 % | Each D-amino acid <= 0.2 %, sum of D-forms <= 0.5 % |
| Blank | Solvent blank (mobile phase A) injected before the sequence; no peak above 0.02 % of the main peak within RRT 0.80 to 1.30 |
| Reference standard | In-house reference standard RS-RET-01 (purity 99.6 %, assigned against a primary standard, stored at -20 °C) injected at the start and end of the sequence; area difference 0.4 %, retention time within 0.1 min |
This is the SHA-256 of the certificate file exactly as it was issued. Run the command against the file you were sent: if the two strings match, your copy is byte for byte the one this laboratory issued.
A copy that has been re-saved, printed to a new file or passed through a converter will not match, because each of those produces a different file. Compare the certificate exactly as it was sent to you, or the copy downloadable from this page.
59aee78cac7195e3c2847fe111308eb1c4c75f6e37c8e4c8f0a1175c14cd63a5
shasum -a 256 AN-2026-00001.pdf
On Windows: certutil -hashfile AN-2026-00001.pdf SHA256
This badge links to this record, so anyone who clicks it lands on the laboratory's own copy of the result.
The same record is available as JSON at /verify/AN-2026-00001-YQMGNK6NBD/record.json, so a shop can pull the results into a product page without anyone retyping a number.
<a href="https://analyton.com/verify/AN-2026-00001-YQMGNK6NBD/"><img src="https://analyton.com/verify/AN-2026-00001-YQMGNK6NBD/badge.svg" alt="Tested by ANALYTON, report AN-2026-00001" width="260" height="70"></a>Verified against the ANALYTON register. Questions to lab@analyton.com