Verification · Certificates issued
Certificate AN-2026-00006
Valid
Issued
This certificate was issued by ANALYTON and has not been withdrawn.
Verification confirms that a certificate with this number and key was issued by ANALYTON on the date shown, for the sample described, and states its current status.
| Report number | AN-2026-00006 |
| Issued | 2026-09-22 |
| Status | Valid |
| Sample | Epithalon, lyophilised powder, vial labelled 10 mg |
| Batch number | ATEPI-10-2512-01 |
| Matrix | Research peptide |
| Determinations performed | 20 |
| Issued by | ANALYTON |
| Certificate file | AN-2026-00006.pdf |
Labelled 10 mg / 9.21 mg peptide / 92.1% of label
The container was labelled 10 mg and held 10.95 mg of powder when weighed. Net peptide content of that powder is 84.14% w/w, so the peptide in the container is 9.21 mg.
| Determination | Method | Result | Specification |
|---|---|---|---|
| Appearance | Visual | White to off-white powder | White to off-white powder |
| Purity | RP-HPLC, C18, 214 nm, area % | 99.93 ± 0.20 % (k = 2) | >= 98.0 % |
| Related substances | RP-HPLC, 214 nm; LOD 0.01 %, LOQ 0.03 %, reporting threshold 0.05 % | Largest single impurity 0.07 % at RRT 0.96 (± 0.03 %); total impurities 0.07 %, i.e. 0.006 mg per vial | Single <= 1.0 %, total <= 2.0 % |
| Impurity profile | RP-HPLC with LC-HRMS assignment | RRT 0.96, 0.07 %, same mass (isoAsp) | Peaks above 0.05 % reported (ICH Q3B) |
| Net peptide content | Assay | 84.14 ± 1.2 % w/w (k = 2) | — |
| Fill weight | Gravimetric | 10.95 ± 0.05 mg | Labelled 10 mg |
| Peptide per vial | Calculated from fill weight and net peptide content | 9.21 mg per vial labelled 10 mg, i.e. 92.1 % of label | 95 to 105 % of label |
| Vial-to-vial consistency | Gravimetric, two vials of the batch | 10.95 and 10.90 mg, difference 0.5 % | <= 5 % |
| Counter-ion content | Ion chromatography, suppressed conductivity | Acetate 9.50 % w/w (± 0.57 %), i.e. 1.04 mg per vial | — |
| Trifluoroacetate | Ion chromatography, LOQ 20 ppm | Not detected | — |
| Water content | Coulometric Karl Fischer, USP <921> | 5.80 ± 0.29 % w/w (k = 2), i.e. 0.64 mg per vial | <= 8.0 % |
| Mass balance | Peptide + counter-ion + water | 84.14 + 9.50 + 5.80 = 99.44 % (± 1.3 %) | Close to 100 % |
| pH | Potentiometric, 10 mg/ml in water | 5.2 | 4.4 to 6.0 |
| Solubility | Visual | >= 100 mg/ml in water | >= 60 mg/ml |
| Bacterial endotoxins | Kinetic chromogenic LAL, USP <85> | < 0.05 EU/mg (< 0.55 EU per vial) | <= 10 EU/mg |
| Sterility | Membrane filtration, USP <71>; fluid thioglycollate 30 to 35 °C and soya bean casein digest 20 to 25 °C | No growth after 14 days, 2 vials | No growth |
| Microbial enumeration | Plate method, USP <61> and <62> | TAMC < 10 CFU/g, TYMC < 10 CFU/g; E. coli, Salmonella, S. aureus and P. aeruginosa absent in 1 g | TAMC <= 1000 CFU/g, TYMC <= 100 CFU/g, specified organisms absent |
| Residual solvents | Headspace GC, USP <467> | Acetonitrile 45 ppm; N,N-dimethylformamide, methanol, dichloromethane, diethyl ether, diisopropyl ether and piperidine each < 10 ppm (LOQ 10 ppm) | ICH Q3C: acetonitrile <= 410, DMF <= 880, methanol <= 3000, dichloromethane <= 600, ethers <= 5000 ppm |
| Elemental impurities | ICP-MS after microwave digestion (HNO3/H2O2), USP <233> | Cd, Pb, As, Hg < 0.05 µg/g; Co, V, Ni < 0.10 µg/g, all below LOQ | ICH Q3D(R2) Class 1 and 2A, parenteral PDE |
| Chiral purity (D-amino acids) | Acid hydrolysis (6 M DCl in D2O, 110 °C, 24 h), Marfey's derivatisation (FDAA), LC-MS | D-Asp 0.12 %, D-Glu 0.05 %, D-Ala < 0.05 %; Gly achiral; sum of D-forms 0.19 % | Each D-amino acid <= 0.2 %, sum of D-forms <= 0.5 % |
| Compound screening | LC-HRMS full scan, m/z 100 to 2000, against library: fentanyl and analogues, DSIP, pinealon, protected intermediates (tBu, Boc, Trt, Pbf, Fmoc), free amino acids | None detected above 0.05 % area | No foreign compound above 0.05 % area |
| Blank | Solvent blank (mobile phase A) injected before the sequence; no peak above 0.02 % of the main peak within RRT 0.80 to 1.30 |
| Reference standard | In-house reference standard RS-EPI-01 (purity assigned against a primary standard, stored at -20 °C) injected at the start and end of the sequence; area difference 0.4 %, retention time within 0.1 min |
This is the SHA-256 of the certificate file exactly as it was issued. Run the command against the file you were sent: if the two strings match, your copy is byte for byte the one this laboratory issued.
A copy that has been re-saved, printed to a new file or passed through a converter will not match, because each of those produces a different file. Compare the certificate exactly as it was sent to you, or the copy downloadable from this page.
7fc9fb4c0572866e3e988b1cf6c4a027596d5ee34f52b97283b3fbec67d2382b
shasum -a 256 AN-2026-00006.pdf
On Windows: certutil -hashfile AN-2026-00006.pdf SHA256
This badge links to this record, so anyone who clicks it lands on the laboratory's own copy of the result.
The same record is available as JSON at /verify/AN-2026-00006-J8HMCB6SJE/record.json, so a shop can pull the results into a product page without anyone retyping a number.
<a href="https://analyton.com/verify/AN-2026-00006-J8HMCB6SJE/"><img src="https://analyton.com/verify/AN-2026-00006-J8HMCB6SJE/badge.svg" alt="Tested by ANALYTON, report AN-2026-00006" width="260" height="70"></a>Verified against the ANALYTON register. Questions to lab@analyton.com